How To Strip & Wax Floor In The Right Way - Terra Cleaning Services Blog

Even with meticulous daily & periodic cleaning practices such as vacuuming & cleaning with an auto scrubber, commercial hard flooring will ultimately see damage & start to look shabby.

Your flooring’s top is layered with a finish to safeguard against wear & tear but it’ll eventually start to pile up dirt, dents, and other impacts of immense foot traffic.

Floor finish wears down and periodic vacuuming is no longer adequate to restore the shine of your floor. When this occurs, it’s probably time to strip & finish the floor of your facility.

Doing a floor strip & finish is an expensive and time-consuming work, but when done professionally it can restore the look of your floor and safeguard it from potential damage.

However, there’re many mistakes facility owners usually make while stripping the finish from commercial floors.

It’s critical to be aware of the most widespread mistakes you can avoid preventing irreparable damage to hard floors.

Some of the common mistakes you can make while stripping floors include:

· Inappropriate chemical dilution

· The Floor isn’t compatible with chemical

· Not adequate dwell time

· Floor dries prior to chemical is taken off

· Chemical stays on the floor after rinsing

Floor strippers are really harsh & can leave behind remain and dent flooring if the floor substrate isn’t tolerant of the stripper being employed. Every floor substrate is different & will require to be well-matched with the stripping product being employed in order to not dent the floor.

For instance, specific surface such as marble, granite, linoleum, and luxury vinyl tile can be damaged by some floor stripping chemicals where vinyl composition tile may not.

Wrongly diluted chemicals can damage floors. For instance, employing excessive chemical can bleach floors permanently.

Make use of cold water while preparing the stripping solution. Employing hot water can increase chemicals odours & can reduce the efficiency of the chemical.

Always dilute as per the manufacturer’s suggested levels. The right chemical dilution can be found on the product container.

Also, remember commercial floor strippers which aren’t employed with the right dwell time can make the removal process hectic, eventually requiring more labour.

In the majority of the cases, the stripper requires to dwell for ten to fifteen minutes prior to any physical agitation is applied, but may differ from one manufacturer to other. Inspect the product label for suggested dwell times. Call Terra Cleaning now if you need professional Floor Stripping Services in Morgan Hill. Call us on 408.779.4368.

This blog is originally posted here : https://terracleaningservices.wordpress.com/2020/11/04/how-to-strip-wax-floor-in-the-right-way/